For Hobby Gardeners

The questions of consumption as well as increased production of healthy, high quality foods have become more and more important over the last few years. But where does healthy eating actually start?

In the plant and your own garden of course!

People, who have invested time and effort into creating their own garden know this. And it is more than just the inner attitude which causes them to deal with themselves and their health, more conciously.

BactoFert

Our product BactoFert is in compliance with the guidelines, applied for organic farming. Ist use improves the quality of the soil as well as the quality of the harvest. Applied in the garden, you will enjoy high quality food, which is good for your health.

GeoHumat

From now on, you can use the power of pure cell-energy. GeoHumat is a liquid, which can be used in various ways. Applied directly onto the leafs oft he plant, it supports your plants during stress moments like freeze/thaw cycles in spring or pest infestation. It increases the photosynthesis rate of the plant and regulates the osmotic pressure. If applied to the ground, it manifolds the biodiversity in the soil, hence resulting in anincreased humus production.

Application guidelines BactoFert

Apply BactoFert at a depth of 5-15 cm. Only within this margin, the microorganisms can react with water and oxygen in an optimal way. If applied deeper, they are cut from the atmosphere and die. Just pooring the product on the ground is not sufficient either. High sun intensity and temperature changes have negative impacts on the microorganisms as well.

Dose
1,5 Kg of BactoFert is sufficient for up to 50 square meters. 50 Kg are sufficient for 1.500 square meters. If you want to apply BactoFert to single plants, carefully open up the top soil and place the product directly at the root of  the plant. Close the hole again and add water.

Classification
The mixture is not regarded as dangerous in the sense of ordinance (EG) Nr. 1272/2008. The product is not suitable for eating. Keep out of the reach of children. In case of eye contact, rinse with lots of water.

Application guidelines GeoHumat

Shake properly before use.

On seeds:
Mix 10 ml of the product with 1 litre of water. Put the seeds into this dispertion for 2 hours. Now your seedy are active and ready to go into the soil. Keep the dispertion in a spraying device.

On leafs:
As soon as the first leafs break through the ground, spray them with the dispertion. Here the concentration is also 10 ml on 1 litre of water. Repeat spraying the leafs 3 times with an interval of at least 10 days.

On the soil:
Mix 3 caps of GeoHumat with 5 to 10 litres of water and give it on the ground only. Make sure that no seeds are in the ground. They might take harm. Now you can start to dig the ground over.

Classification:
The mixture is not regarded as dangerous in the sense of ordinance (EG) Nr. 1272/2008. The product is not suitable for eating. Keep out of the reach of children. In case of eye contact, rinse with lots of water.

You can download the application guidelines for GeoHumat and BactoFert here:
Application guidelines BactoFert und GeoHumat (402.27KB)

We take orders via our online-order form